Cisco 2600 Series 설치 매뉴얼 - 페이지 5

{카테고리_이름} Cisco 2600 Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2600 Series 22 페이지. Configuring adsl wic to support pppoe clients
Cisco 2600 Series에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 릴리스 정보 (32 페이지), 구성 (15 페이지), 애플리케이션 노트 (41 페이지), 데이터시트 (6 페이지), 부록 (15 페이지), 개요 (13 페이지), 빠른 시작 매뉴얼 (2 페이지), 매뉴얼 (5 페이지)

페이지 인쇄

Chapter 3

Installing the Router

•

Figure 3-4

Bracket for use

with a 19-inch rack

Figure 3-5

chassis side opposite fans

Attaching the Brackets to Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series Routers

To install the chassis in a rack, attach the brackets in one of the following ways:

•

Note

Use the screws that came with your router package for attaching the brackets.

Note

If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.5-inch opening, orient the

rack-mount brackets so that, when installed, they do not increase the width of the chassis. (See

Figure

If you are installing a Cisco 2600 series router in a 19-inch rack with a 17.75-inch opening or a 23- or

24-inch rack, orient the rack-mount brackets so that, when installed, they increase the width of the

chassis. (See

OL-2171-02

If the rack contains stabilizing devices, install the stabilizers before mounting or servicing the unit

in the rack.

Brackets for Cisco 261x, Cisco 262x, Cisco 26xxXM, and Cisco 265x Series Routers

Bracket for use with a

23-inch or 24-inch rack

Brackets for Cisco 2691 Router

Narrow bracket for

With the front panel forward (see

With the rear panel forward (see

In a center-mount rack, with the rear panel forward (see

3-6.)

Figure

3-7.)

Slots for

cable tie

attachment

Wide bracket for

chassis side with fans

Figure 3-6

and

Figure

3-7)

Figure 3-8

and

Figure

3-9)

Figure 3-10

Cisco 2600 Series Routers Hardware Installation Guide

Setting Up the Chassis

through

Figure

3-12)

3-5