Cisco 2811 Series 운영 - 페이지 5

{카테고리_이름} Cisco 2811 Series에 대한 운영을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 2811 Series 31 페이지. 2800 series integrated services routers
Cisco 2811 Series에 대해서도 마찬가지입니다: 데이터시트 (20 페이지), 운영 (31 페이지), 설치 및 업그레이드 (14 페이지), 빠른 시작 매뉴얼 (47 페이지)

페이지 인쇄

2 Cisco 2811 and 2821 Routers

Branch office networking requirements are dramatically evolving, driven by web and e-

commerce applications to enhance productivity and merging the voice and data infrastructure to

reduce costs. The Cisco 2811 and 2821 routers provide a scalable, secure, manageable remote

access server that meets FIPS 140-2 Level 2 requirements. This section describes the general

features and functionality provided by the routers. The following subsections describe the

physical characteristics of the routers.

2.1 The 2811 Cryptographic Module Physical Characteristics

Figure 1 – The 2811 router case

The 2811 Router is a multiple-chip standalone cryptographic module. The router has a

processing speed of 350MHz. Depending on configuration, installed AIM-VPN/EPII-Plus

module, or the internal NetGX chip or the IOS software is used for cryptographic operations.

The cryptographic boundary of the module is the device's case. All of the functionality

discussed in this document is provided by components within this cryptographic boundary.

The interface for the router is located on the front and rear panels as shown in Figure 2 and

Figure 3, respectively.

Figure 2 – Front Panel Physical Interfaces

This document may be freely reproduced and distributed whole and intact including this Copyright Notice.