Epson EX30 빠른 설정 매뉴얼 - 페이지 3
{카테고리_이름} Epson EX30에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EX30 7 페이지. Brochure
Epson EX30에 대해서도 마찬가지입니다: 사양 (2 페이지), 적합성 선언 (4 페이지), 부품 목록 (1 페이지), 브로셔 (2 페이지)
페이지 인쇄
4
Set up the remote control
1
Remove the battery cover.
2
I nsert the batteries.
3
Replace the battery cover.
EX30/EX50
EX70
5
Connect your video source
Follow these instructions to connect the projector to your computer using
the USB cable (Windows
cable (EX70 only) or component video cable. For instructions on using
other connection options, see the User's Guide on your CD-ROM.
Connecting with a USB cable
If you're connecting a Windows Vista
projector, you can use the USB cable. You don't need to use the VGA
cable.
1
Make sure the projector is turned on.
2
Turn on your computer.
3
Connect the square end of the USB cable to the projector's TypeB
USB port.
4
Connect the flat end of the cable to any available USB port on your
computer.
5
Follow the instructions on your computer screen to install the Epson
USB Display software (you need to install the software only the first
time you connect). After the software has been installed, you see
your computer's screen displayed by the projector.
I f you see a "Digital Signature Warning" while installing the
NOTE
software, select Continue.
You can connect an optional audio cable if you want to play sound through
the projector. See the User's Guide on your CD-ROM for instructions.
only), or to your video equipment using an HDMI
®
, XP, or 2000 computer to the
®
Turn over