Epson EX30 Podręcznik szybkiej konfiguracji - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Projektor Epson EX30. Epson EX30 7 stron. Brochure
Również dla Epson EX30: Specyfikacje (2 strony), Deklaracja zgodności (4 strony), Lista części (1 strony), Broszura (2 strony)
Drukuj stronę
4
Set up the remote control
1
Remove the battery cover.
2
I nsert the batteries.
3
Replace the battery cover.
EX30/EX50
EX70
5
Connect your video source
Follow these instructions to connect the projector to your computer using
the USB cable (Windows
cable (EX70 only) or component video cable. For instructions on using
other connection options, see the User's Guide on your CD-ROM.
Connecting with a USB cable
If you're connecting a Windows Vista
projector, you can use the USB cable. You don't need to use the VGA
cable.
1
Make sure the projector is turned on.
2
Turn on your computer.
3
Connect the square end of the USB cable to the projector's TypeB
USB port.
4
Connect the flat end of the cable to any available USB port on your
computer.
5
Follow the instructions on your computer screen to install the Epson
USB Display software (you need to install the software only the first
time you connect). After the software has been installed, you see
your computer's screen displayed by the projector.
I f you see a "Digital Signature Warning" while installing the
NOTE
software, select Continue.
You can connect an optional audio cable if you want to play sound through
the projector. See the User's Guide on your CD-ROM for instructions.
only), or to your video equipment using an HDMI
®
, XP, or 2000 computer to the
®
Turn over