Actsoft LMU-5000 하드웨어 및 설치 매뉴얼 - 페이지 6

{카테고리_이름} Actsoft LMU-5000에 대한 하드웨어 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Actsoft LMU-5000 8 페이지.

I/O Descriptions

The LMU-5000™ provides the following inputs and outputs (I/O):

Digital Inputs

Input 0: Ignition Sense (Always biased low)

Input 1: Generic Digital Input (Biased high or low/ S-158 Bit 1)

Input 2: Generic Digital Input (Biased high or low/ S-158 Bit 2)

Input 3: Generic Digital Input (Biased high or low/ S-158 Bit 3)

Input 4: Generic Digital Input (Biased high or low/ S-158 Bit 4)

Input 5: Generic Digital Input (Biased high or low/ S-158 Bit 5)

Input 6: Generic Digital Input (Biased high or low/ S-158 Bit 6)

Input 7: Generic Digital Input (Biased high or low/ S-158 Bit 7)

Analog to Digital Inputs

A/D 0: External Power Supply Monitor

A/D 1: External A/D Input (From Power Connector)

A/D 2: External A/D Input (From 22 Pin I/O Conenctor)

A/D 3: External A/D Input (From 22 Pin I/O Conenctor)

A/D 4: External A/D Input (From 22 Pin I/O Conenctor)

A/D 5: External A/D Input (From 22 Pin I/O Conenctor)

A/D 6: GPS Antenna Sense

A/D 7: LMU-5000, Internal Temp Monitor

Outputs:

Output 0: Standard Open Collector Relay Output

Output 1: Standard Open Collector Relay Output

Output 2: Standard Open Collector Relay Output

Output 3: Standard Open Collector Relay Output

Output 4: Standard Open Collector Relay Output

Output 5: LED Driver Output 1

Output 6: LED Driver Output 2

iButton / 1 Bit Bus

iButton ID Support

1Wire bus with current boost for temperature sensors