CAB EOS2 서비스 매뉴얼 - 페이지 11

{카테고리_이름} CAB EOS2에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB EOS2 20 페이지.
CAB EOS2에 대해서도 마찬가지입니다: 운영자 매뉴얼 (15 페이지)

페이지 인쇄
CAB EOS2 서비스 매뉴얼
2
Replacing Assembly Units
2.6

Replacing the Transport Module

1
2
3
4
Fig. 6
Removing / mounting transport module 1
Removing
 Remove the tear-off plate/cutter.
 Remove the casing.
 Unplug the connector (1) of the label sensor (2).
 Move the label sensor as far as possible to the operator's side  Operator's Manual.
 Remove screw (3) and 5 screws (4).
5
2
6
7
8
Fig. 7
Removing / mounting transport module 2
 Remove control panel.
 Remove the transport module (7) with the printing roller (6) by tilting from the chassis (5).
 Pull the cutter connection cable (8) downward out of the transport module (7).
Mounting
 Mount the assembly units in reverse order.
11