CAB EOS2 Servis Kılavuzu - Sayfa 11

Etiket makinesi CAB EOS2 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. CAB EOS2 20 sayfaları.
Ayrıca CAB EOS2 için: Operatör El Kitabı (15 sayfalar)

Sayfayı Yazdır

1. Table of Contents
2. Instructions
3. Replacing the Print Roller
4. Troubleshooting and Error Treatment
5. Permanent Hardware Faults
6. Failure of Device Functions
7. Block Diagram
8. Layout Diagram Pcb Cpu

Replacing Assembly Units

2.6

Replacing the Transport Module

Fig. 6

Removing / mounting transport module 1

Removing

 Remove the tear-off plate/cutter.

 Remove the casing.

 Unplug the connector (1) of the label sensor (2).

 Move the label sensor as far as possible to the operator's side  Operator's Manual.

 Remove screw (3) and 5 screws (4).

Fig. 7

Removing / mounting transport module 2

 Remove control panel.

 Remove the transport module (7) with the printing roller (6) by tilting from the chassis (5).

 Pull the cutter connection cable (8) downward out of the transport module (7).

Mounting

 Mount the assembly units in reverse order.