Cisco NCS 4000 Series 문제 해결 매뉴얼 - 페이지 42

{카테고리_이름} Cisco NCS 4000 Series에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 4000 Series 44 페이지. Network convergence system
Cisco NCS 4000 Series에 대해서도 마찬가지입니다: 포장 풀기, 이동 및 고정 매뉴얼 (40 페이지)

페이지 인쇄

TIMING-PLL-VAL-ERROR

If the condition does not clear, log into the Technical Support Website at

index.html

TIMING-PLL-VAL-ERROR

Default Severity: Critical.

Logical Object: None

TIMING-PLL-VAL-ERROR alarm occurs when the Timing-PLL version check has failed.

Clear the TIMING-PLL-VAL-ERROR Alarm

Procedure

Step 1

Verify FPD status for Timing-FPGA and ECU-FPGA, use the show hw-module fpd <fpd-name> command.

Step 2

If the FPD(s) status is not CURRENT, then upgrade to the running version using upgrade hw-module

location all fpd <fpd-name> command.

Step 3

Reload the LC using hw-module location <LC location> reload command.

Note

If the condition does not clear, log into the Technical Support Website at

index.html

Alarms Troubleshooting Guide for Cisco NCS 4000 Series

for more information or call Cisco TAC (1 800 553-2447).

Perform LC reload only if reload is required to complete the FPD upgrade.

Reload is traffic impacting operation and should be carried in planned maintenance window.

for more information or call Cisco TAC (1 800 553-2447).

Alarm Management

http://www.cisco.com/c/en/us/support/