CAB 5946091 운영자 매뉴얼 - 페이지 8

{카테고리_이름} CAB 5946091에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB 5946091 10 페이지. External unwinder eu4 for thermal transfer printer a3/a4/m4

Insertion of the prepared Winding Axle

NOTICE !

Attend on the different positions of the Unwinder. The position depends on the

wounding of the material rolls as described in chapter "Placing the

Unwinder".

Fig. 7 Unwinding from a Roll with outside wound Labels

Fig. 8 Unwinding from a Roll with inside wound Labels

Hang up the axle with material in the unwinder. When hanging up, the

flange with the knurled screw has to be in front.

Feed the label strip (14) over the swing arm (7) and the rewind axle (15)

to the printer.

Insert the material according to the instructions of the printers operator`s

manual.

Align the unwinder to the printer ( vide "Adjusting the Unwinder")