Cisco SGE2000 구성 매뉴얼 - 페이지 33

{카테고리_이름} Cisco SGE2000에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SGE2000 46 페이지. Nx-os fabric extender
Cisco SGE2000에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (32 페이지), 릴리스 노트 (16 페이지), 데이터시트 (5 페이지), 펌웨어 업그레이드 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (2 페이지)

Configuring the Fabric Extender

Command or Action

Step 6

no type

Example:

switch(config-fex)# no type

Step 7

serial serial

Example:

switch(config-fex)# serial

JAF1339BDSK

Step 8

no serial

Example:

switch(config-fex)# no serial

Configuration Examples

This section contains examples of FEX configurations.

OL-25816-02

Purpose

• N2248T and N2248TP-E—48 100Base-T/1000Base-T Ethernet host

interfaces and 4 10-Gigabit SFP+ Ethernet fabric interfaces module.

The parent Cisco Nexus Series device remembers the type of the Fabric

Extender in its binary configuration. When this feature is configured, the Fabric

Extender is only allowed to come online if its type matches the configured

FEX-type.

(Optional)

Deletes the FEX type. When a Fabric Extender is connected to the fabric

interfaces and does not match the configured type saved in the binary

configuration on the parent switch, all configurations for all interfaces on the

Fabric Extender are deleted.

(Optional)

Defines a serial number string. If this command is configured, a switch only

allows the corresponding chassis ID to associate (using the fex associate

command) if the Fabric Extender reports a matching serial number string.

Configuring a serial number that does not match the specified

Caution

Fabric Extender forces the Fabric Extender offline.

(Optional)

Deletes the serial number string.

Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide

Configuration Examples