CAB MAESTRO 4S 운영자 매뉴얼 - 페이지 14

{카테고리_이름} CAB MAESTRO 4S에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CAB MAESTRO 4S 20 페이지. Pcb separator

Maintenance

9.2

Adjustment of the Upper Blade Stopper

Notice!

The lower stop of the upper blade adjustment is already adjusted by delivery.

 After a long operation time, while working at strongly varying temperatures or else after replacing a

blade, it is recommended to re-adjust the lower stop.

Fig.11

Adjustment of the upper blade stopper

1. Move the lever (8) to the position 'a'. The motor drive to the blade carrier (1) is now disconnected.

2. Rotate the pointer (2) with the knob (4) counterclockwise to position "16".

3. Move the upper blade carrier (1) in the middle position of the lower blade.

4. Loosen the screw (3).

5. Move the knob (4) clockwise until the upper and lower blades are in a distance of 0.03 mm. Use a thickness

gauge.

6. Swing the strut (5) clockwise until you reach the stop and tighten the screw (3). This adjustment locks the upper

blade in place to prevent it from moving out of adjustment.

7. Move the lever (8) to the position 'b'. The motor drive to the blade carrier (1) is now reconnected.

5 6