Cisco UBR7246VXR 빠른 시작 매뉴얼 - 페이지 11
{카테고리_이름} Cisco UBR7246VXR에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UBR7246VXR 27 페이지. Universal broadband router
Cisco UBR7246VXR에 대해서도 마찬가지입니다: 사용자 설명서 (7 페이지), 설치 매뉴얼 (28 페이지), 하드웨어 설치 (25 페이지)
페이지 인쇄
Figure 7
Installing the Rack-Mount Brackets in the Middle of the Chassis for Open or Relay-Type Racks
Rack-mount bracket
Installing the Cable-Management Brackets
If you are rack-mounting the chassis at the rear or middle of the chassis, both rack-mount brackets and the cable-management
bracket must be installed before the chassis is installed in the rack. See Figure 8 for cable management bracket locations.
To install the cable-management bracket, complete the following steps:
Align the cable-management bracket with the four right front threaded holes in the chassis.
Step 1
Thread four M4 x 6-mm Phillips flathead screws through the bracket and into the chassis, and use a number 2 Phillips
Step 2
screwdriver to tighten the screws.
Figure 8
Location of Cable Management Bracket
1
Cable-management
Rack-mount
bracket
Location of cable management bracket—rear mount
1
2
bracket
Rack-mount
bracket
Cable
management
bracket
Rack-mount
bracket
Location of cable management bracket—middle mount
2
11