Cisco WUMC710 사용자 설명서 - 페이지 13

{카테고리_이름} Cisco WUMC710에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WUMC710 17 페이지. 802.11ac
Cisco WUMC710에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 빠른 설치 매뉴얼 (17 페이지)

페이지 인쇄
Cisco WUMC710 사용자 설명서
Linksys WUMC710
Restore
Click Browse and select the configuration file Then click Restore
Configurations
System Reboot
Reboot
To reboot or restart the bridge, click Start to Reboot
Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes
Administration > Factory Defaults
Use this screen to restore the bridge's configuration to its factory default
settings

Factory Defaults

Restore All Settings
To reset the bridge's settings to the factory defaults, click
Restore All Settings Any settings you have saved will be lost when the default
settings are restored
Administration > Upgrade Firmware
Use this screen to upgrade the bridge's firmware Do not upgrade the firmware
unless you are experiencing problems with the bridge or the new firmware has
a feature you want to use
Before upgrading the firmware, download the bridge's firmware upgrade file
from the Linksys website, www.Linksys.com/support

Upgrade Firmware

Please select a file to upgrade the firmware
firmware upgrade file Then click Start to Upgrade and follow the on-screen
instructions
Status > Bridge
The bridge's current status information is displayed
Advanced Configuration
Click Browse and select the
12