Cisco XR 12416 재포장 매뉴얼 - 페이지 18

{카테고리_이름} Cisco XR 12416에 대한 재포장 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco XR 12416 26 페이지. Cisco systems router owner's manual
Cisco XR 12416에 대해서도 마찬가지입니다: 설치 매뉴얼 (41 페이지)

페이지 인쇄

Repackaging the Routers

Shift the pallet to ensure that it is positioned evenly all the way around the

Step 8

scissor-jack platform and the bolt holes in the hold-down brackets on the sides of

the scissor-jack platform are aligned with the holes in the top of the shipping

pallet.

Turn the scissor-jack screw slowly clockwise to close the scissor-jack platform

Step 9

and lower the top of the scissor-jack platform slowly until the hold-down brackets

touch the top of the shipping pallet.

Set a blocking plate into the hold-down bracket so that the blank side of the

Step 10

blocking plate is against the heads of the bolts in the side of the scissor-jack

platform and the open holes in the blocking plate align with the bolt holes in the

top of the pallet.

Insert bolts through each of the hold-down bracket holes and into the holes in the

Step 11

top of the shipping pallet, then use the 9/16-inch (14-mm) wrench to tighten the

bolts.

Turn the scissor-jack screw slowly clockwise to collapse the scissor-jack platform

Step 12

and raise the base of the scissor-jack platform until the weight of the router and

scissor-jack platform is absorbed by the pallet. Continue turning the scissor-jack

screw clockwise to close the scissor-jack platform and lift the base of the

scissor-jack platform until the scissor-jack platform is completely closed (the

screw can not be turned).

Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide

A-18

Appendix A

Repackaging the Router

OL-17440-01