Cisco 1130AG - Aironet - Wireless Access Point 빠른 시작 매뉴얼 - 페이지 44

{카테고리_이름} Cisco 1130AG - Aironet - Wireless Access Point에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 1130AG - Aironet - Wireless Access Point 49 페이지. Ieee 802.11a/b/g access point
Cisco 1130AG - Aironet - Wireless Access Point에 대해서도 마찬가지입니다: 데이터시트 (13 페이지)

페이지 인쇄

3. Press and hold the MODE button while you reconnect power to the

access point.

4. Continue pressing the MODE button until the Ethernet LED turns amber.

(approximately 2 to 3 seconds). Then release the button.

5. After the access point reboots, you must reconfigure it using the web

browser interface, the Telnet interface, or the access point console port.

Using the Web Browser Interface

Follow these steps to delete the current configuration and return all access

point settings to factory defaults using the web browser interface:

1. Open your Internet browser. You must use Microsoft Explorer (version

5.x or later) or Netscape Navigator (version 4.x or later).

2. Enter the access point IP address in the browser address line, and press

Enter. An Enter Network Password screen appears.

3. Enter the username Cisco in the User Name field.

4. Enter the password Cisco in the Password field and press Enter. The

Summary Status page appears.

5. Click System Software. The System Software screen appears.

6. Click System Configuration. The System Configuration screen

appears.

78-15955-02