Cisco 700 series 개요 - 페이지 2

{카테고리_이름} Cisco 700 series에 대한 개요을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 700 series 19 페이지. Using profiles
Cisco 700 series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (8 페이지), 시작하기 매뉴얼 (27 페이지), 사용자 설명서 (9 페이지), 관리 매뉴얼 (36 페이지)

페이지 인쇄

Product Features

This section describes the major features of Cisco 700 series routers.

Dial-On-Demand Routing

Cisco 700 series routers include dial-on-demand routing (DDR). This allows the router to

dynamically initiate calls to remote devices across ISDN BRI lines as trafﬁc demands. The

router also terminates ISDN connections based on the level of the trafﬁc demanded on the

ISDN line and the dynamic routing parameters.

SPID and Switch Automatic Detection

The automatic service proﬁle identiﬁer (SPID) and switch detection feature simpliﬁes the

use of ISDN terminal equipment and makes the equipment easier to use with fewer

parameters to enter. With this feature, the user only has to enter the local directory numbers

with area code. No SPID number or switch type is required from the user. The command

used is the set autodetection command.

The automatic detection feature only applies to ISDN switches for the USA and Canada,

usually an AT&T 5ESS Custom, DMS-100, NI-1, or NI-2 switch. The automatic detection

mechanism might not work with any other switch, such as a Siemens switch. The automatic

detection feature is only implemented in the U. S. image.

TFTP Client

Cisco 700 series routers support the use of a Trivial File Transfer Protocol (TFTP) client.

This feature increases TFTP ﬁle transfer efﬁciency and reliability. The swl tftp command

loads the TFTP client software from the console port.

1-2 Cisco 700 Series Router Installation Guide