Cisco 7200 VXR Series 빠른 시작 매뉴얼 - 페이지 43

{카테고리_이름} Cisco 7200 VXR Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7200 VXR Series 48 페이지. Preparing for installation
Cisco 7200 VXR Series에 대해서도 마찬가지입니다: 데이터시트 (12 페이지), 매뉴얼 (14 페이지)

페이지 인쇄

Figure 26

Removing the Port Adapter Jacket Card

Cisco 7200

Series VXR

Note

If you have difficulty removing the Port Adapter Jacket Card from the lowest slot of a Cisco 7200 VXR router that is

rack-mounted, remove the port adapters, and processing engine from the chassis., then remove the Port Adapter Jacket

Card.

Step 6

Loosen the captive installation screws found at the top left and right corners of the Port Adapter Jacket Card and, using

the handles on the Port Adapter Jacket Card, pull the Port Adapter Jacket Card from the chassis.

Step 7

Replace the Port Adapter Jacket Card with an I/O controller blank panel or another Port Adapter Jacket Card to ensure

proper airflow through the router.

Step 8

If the Port Adapter Jacket Card has been replaced, insert a port adapter or a port adapter blank panel into the Port

Adapter Jacket Card to ensure proper airflow through the router.

Step 9

Tighten the captive installation screws.

Step 10 If you removed the processing engine or port adapters from the chassis, replace them in a bottom-to-top order.

ETHERNET 10BT

TOKEN RING

ETHERNET-10BFL

PORT ADAPTER JACKET CARD