Cisco 7200 VXR Series 빠른 시작 매뉴얼 - 페이지 42

{카테고리_이름} Cisco 7200 VXR Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7200 VXR Series 48 페이지. Preparing for installation
Cisco 7200 VXR Series에 대해서도 마찬가지입니다: 데이터시트 (12 페이지), 매뉴얼 (14 페이지)

페이지 인쇄

Step 4

To insert the port adapter, carefully align the port adapter carrier between the upper and the lower edges of the port

adapter slot guide (4) and slide the new port adapter halfway into the port adapter slot (3).

Step 5

Connect all required cables to the port adapter. After connecting all required cables, carefully slide the port adapter all

the way into the slot until the port adapter is seated in the router midplane.

Step 6

After the port adapter is properly seated, lock the port adapter lever (5).

For port adapter documentation, see the Cisco 7200 Series Routers Port Adapter Documentation Documentation Roadmap.

Replace the Port Adapter Jacket Card

Note

Online insertion and removal (OIR) is not supported on the Port Adapter Jacket Card. OIR is supported on the port

adapter.

Figure 25

Removing a Port Adapter

Cisco 7200

Series VXR

Port adapter lock lever

Step 1

Power down the router.

Step 2

Disconnect the router from the power source.

Step 3

Disconnect any port adapter cable.

Step 4

Remove the port adapter by pressing the lock lever until the port adapter releases.

Step 5

Pull the port adapter from the Port Adapter Jacket Card.

ETHERNET 10BT

ENCRYPTION/COMPRES SION

TOKEN RING

ETHERNET-10BFL

PORT ADAPTER JACKET CARD

SA-VAM2+