Cisco 7200 VXR Series Manual de início rápido - Página 42
Procurar online ou descarregar pdf Manual de início rápido para Ponto de acesso sem fios Cisco 7200 VXR Series. Cisco 7200 VXR Series 48 páginas. Preparing for installation
Também para Cisco 7200 VXR Series: Ficha de dados (12 páginas), Manual (14 páginas)
Imprimir página
Step 4
To insert the port adapter, carefully align the port adapter carrier between the upper and the lower edges of the port
adapter slot guide (4) and slide the new port adapter halfway into the port adapter slot (3).
Step 5
Connect all required cables to the port adapter. After connecting all required cables, carefully slide the port adapter all
the way into the slot until the port adapter is seated in the router midplane.
Step 6
After the port adapter is properly seated, lock the port adapter lever (5).
For port adapter documentation, see the Cisco 7200 Series Routers Port Adapter Documentation Documentation Roadmap.
Replace the Port Adapter Jacket Card
Note
Online insertion and removal (OIR) is not supported on the Port Adapter Jacket Card. OIR is supported on the port
adapter.
Figure 25
Removing a Port Adapter
Cisco 7200
Series VXR
1
Port adapter lock lever
Step 1
Power down the router.
Step 2
Disconnect the router from the power source.
Step 3
Disconnect any port adapter cable.
Step 4
Remove the port adapter by pressing the lock lever until the port adapter releases.
Step 5
Pull the port adapter from the Port Adapter Jacket Card.
42
ETHERNET 10BT
ENCRYPTION/COMPRES SION
1
TOKEN RING
ETHERNET-10BFL
PORT ADAPTER JACKET CARD
SA-VAM2+