Cisco 7200 VXR Series 매뉴얼 - 페이지 3

{카테고리_이름} Cisco 7200 VXR Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7200 VXR Series 14 페이지. Preparing for installation
Cisco 7200 VXR Series에 대해서도 마찬가지입니다: 데이터시트 (12 페이지), 빠른 시작 매뉴얼 (48 페이지)

페이지 인쇄
Cisco 7200 VXR Series 매뉴얼
Chapter 2
Preparing for Installation

Site Requirement Guidelines

Site Requirement Guidelines
The environmental monitoring functionality in the Cisco 7200 VXR routers protects the system and
components from potential damage from overvoltage and overtemperature conditions. To ensure normal
operation and avoid unnecessary maintenance, plan your site configuration and prepare your site before
installation. After installation, make sure the site maintains an ambient temperature of 32°F through
104°F (0°C through 40°C), and keep the area around the chassis as free from dust as is practical.
Planning a proper location for the Cisco 7200 VXR router and the layout of your equipment rack or
wiring closet is essential for successful system operation. Equipment placed too close together or
inadequately ventilated can cause system overtemperature conditions. In addition, chassis panels made
inaccessible by poor equipment placement can make system maintenance difficult. Following are
precautions that can help avoid problems during installation and ongoing operation.
When you plan the location and layout of your equipment rack or wiring closet, you need to consider
how air flows through your router. The Cisco 7200 VXR routers draw cooling air in through the intake
vent on the right side of the chassis (when you view the router from the front), and move the air across
the internal components and out the exhaust vent on the left side of the chassis.
Temperature sensors on the network processing engine or network services engine and I/O controller
monitor the internal air temperature and send warning messages when the internal air temperature
approaches a specified threshold. If the internal temperature exceeds the specified threshold, the system
environmental monitor shuts down all internal power to prevent equipment damage from excessive heat.
(See the
"Environmental Monitoring and Reporting Functions" section on page 1-59
for temperature
threshold information.)
Figure 2-1
shows the airflow through the router.
Cisco 7200 VXR Installation and Configuration Guide
2-3
OL-5013-09