Cisco 800 Series 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Cisco 800 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 800 Series 17 페이지. Fast step software design guide
Cisco 800 Series에 대해서도 마찬가지입니다: 릴리스 정보 (36 페이지), 빠른 시작 매뉴얼 (13 페이지), 구성 (32 페이지), 디자인 매뉴얼 (50 페이지)
페이지 인쇄
8
Connect Telephone, Fax Machine, or Modem
If you have a Cisco 803 or Cisco 804 router, you can connect a touch-tone telephone, fax machine, or modem. Use the cables
provided with these devices.
The gray PHONE 1 and PHONE 2 ports are RJ-11 connectors. If you are outside of North America, you must buy and attach
adapters that allow your telephones, faxes, or modems to be connected to these RJ-11 connectors. In some countries, these
adapters need additional electronics to convert the telephones, faxes, or modems to work properly with the router phone ports.
For example, in the United Kingdom, you must buy an adapter that also provides a master socket, which causes incoming calls
to ring the connected devices. For information on recommended master sockets, see the Cisco 800 Series Routers Hardware
Installation Guide.
Do not connect the router telephone ports to the telephone wall jack. These ports are not meant for direct
Caution
connection to the public network. This connection can damage your router.
Figure 5
Connecting an 800 Series Router to a Telephone
HU B
NO HU B
C is c o 8
ET HE RN
0 4
ET 10 BA
SE T
CO NS OL
E
0
1
2
3
Cisco 804 router
Connect one end of the telephone cable to the gray PHONE 1 or PHONE 2 port. If you are connecting only one device,
Step 1
use the PHONE 1 port.
Connect the other end of the cable to your device.
Step 2
8
IS DN U
PH ON E
1
2
Analog telephone