Cisco 800 Series Hızlı Başlangıç Kılavuzu - Sayfa 8
Kablosuz Erişim Noktası Cisco 800 Series için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 800 Series 17 sayfaları. Fast step software design guide
Ayrıca Cisco 800 Series için: Sürüm Notları (36 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Yapılandırma (32 sayfalar), Tasarım Kılavuzu (50 sayfalar)
Sayfayı Yazdır
8
Connect Telephone, Fax Machine, or Modem
If you have a Cisco 803 or Cisco 804 router, you can connect a touch-tone telephone, fax machine, or modem. Use the cables
provided with these devices.
The gray PHONE 1 and PHONE 2 ports are RJ-11 connectors. If you are outside of North America, you must buy and attach
adapters that allow your telephones, faxes, or modems to be connected to these RJ-11 connectors. In some countries, these
adapters need additional electronics to convert the telephones, faxes, or modems to work properly with the router phone ports.
For example, in the United Kingdom, you must buy an adapter that also provides a master socket, which causes incoming calls
to ring the connected devices. For information on recommended master sockets, see the Cisco 800 Series Routers Hardware
Installation Guide.
Do not connect the router telephone ports to the telephone wall jack. These ports are not meant for direct
Caution
connection to the public network. This connection can damage your router.
Figure 5
Connecting an 800 Series Router to a Telephone
HU B
NO HU B
C is c o 8
ET HE RN
0 4
ET 10 BA
SE T
CO NS OL
E
0
1
2
3
Cisco 804 router
Connect one end of the telephone cable to the gray PHONE 1 or PHONE 2 port. If you are connecting only one device,
Step 1
use the PHONE 1 port.
Connect the other end of the cable to your device.
Step 2
8
IS DN U
PH ON E
1
2
Analog telephone