Cisco 800 Series 구성 - 페이지 5

{카테고리_이름} Cisco 800 Series에 대한 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 800 Series 32 페이지. Fast step software design guide
Cisco 800 Series에 대해서도 마찬가지입니다: 릴리스 정보 (36 페이지), 빠른 시작 매뉴얼 (13 페이지), 빠른 시작 매뉴얼 (17 페이지), 디자인 매뉴얼 (50 페이지)

페이지 인쇄

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

interface dot11Radio interface

Example:

Router(config)# interface dot11Radio 0/3/0

Step 4

station-role {root [access-point | ap-only |

bridge [wireless-clients]] | non-root [bridge]}

Example:

Router(config-if)# station-role non-root

Step 5

end

Example:

Router(config-if)# end

Step 6

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuring Radio Data Rates on an Access Point

Perform this task to configure radio data rates.

SUMMARY STEPS

enable

configure terminal

interface dot11Radio interface

speed {data-rates | default | ofdm-throughput | range | throughput}

end

copy running-config startup-config

How to Configure Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enters configuration mode for the radio interface.

The interface argument is in module/slot/port format,

•

except for the Cisco 800 series and Cisco 1800 series

fixed-configuration routers, where the interface

argument is either 0 or 1.

The 2.4-GHz radio is port 0, and the 5-GHz radio is

•

port 1.

Sets the role of the radio interface.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.