Cisco 800 Series Yapılandırma - Sayfa 5

Kablosuz Erişim Noktası Cisco 800 Series için çevrimiçi göz atın veya pdf Yapılandırma indirin. Cisco 800 Series 32 sayfaları. Fast step software design guide
Ayrıca Cisco 800 Series için: Sürüm Notları (36 sayfalar), Hızlı Başlangıç Kılavuzu (13 sayfalar), Hızlı Başlangıç Kılavuzu (17 sayfalar), Tasarım Kılavuzu (50 sayfalar)

Sayfayı Yazdır

Configuring Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

interface dot11Radio interface

Example:

Router(config)# interface dot11Radio 0/3/0

Step 4

station-role {root [access-point | ap-only |

bridge [wireless-clients]] | non-root [bridge]}

Example:

Router(config-if)# station-role non-root

Step 5

end

Example:

Router(config-if)# end

Step 6

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuring Radio Data Rates on an Access Point

Perform this task to configure radio data rates.

SUMMARY STEPS

enable

configure terminal

interface dot11Radio interface

speed {data-rates | default | ofdm-throughput | range | throughput}

end

copy running-config startup-config

How to Configure Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enters configuration mode for the radio interface.

The interface argument is in module/slot/port format,

•

except for the Cisco 800 series and Cisco 1800 series

fixed-configuration routers, where the interface

argument is either 0 or 1.

The 2.4-GHz radio is port 0, and the 5-GHz radio is

•

port 1.

Sets the role of the radio interface.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.