Cisco AIR-AP1010 - 1000 Series Lightweight Access Point 빠른 시작 매뉴얼 - 페이지 21
{카테고리_이름} Cisco AIR-AP1010 - 1000 Series Lightweight Access Point에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco AIR-AP1010 - 1000 Series Lightweight Access Point 36 페이지. Aironet 1000 series ieee 802.11a/b/g lightweight access points with internal antennas
페이지 인쇄
Installation and Configuration
Figure 6
Attach the cables to the sides of the AP.
4.
Be sure the cables are routed away from the AP antennas.
Note
When the AP is powered up and is associated with a Cisco Wireless LAN Controller (Green/Power and
Note
Yellow/802.11b/g and/or Yellow or Amber/802.11a LEDs lit), the AP is broadcasting its beacon
signal(s). When this happens, complete the installation as quickly as possible to remove yourself from
within 8 inches (20 cm) of the AP to comply with FCC RF radiation exposure guidelines.
Y
ou have installed the AP . Repeat
with
"Returning MAC
7817146-01
Clipping the AP and Ceiling-Mount Clips to a Hanging-Ceiling Rail
"Mounting the Access
Information".
AP1010 Cisco Aironet 1000 Series IEEE 802.11a/b/g Lightweight Access Points with Internal
Mounting the Access Points
Points" for each AP location, and then continue
9