Cisco Aironet 1570 Series 하드웨어 설치 매뉴얼 - 페이지 3
{카테고리_이름} Cisco Aironet 1570 Series에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Aironet 1570 Series 10 페이지. Outdoor access point
Cisco Aironet 1570 Series에 대해서도 마찬가지입니다: 주문 매뉴얼 (17 페이지)
페이지 인쇄Chapter 2
Preparing for Installation
Only trained and qualified personnel should be allowed to install, replace, or service this
Warning
equipment. Statement 1030
Warning
Installation of the equipment must comply with local and national electrical codes. Statement
1074
Warning
Installation of the equipment must comply with local and national electrical codes. Statement
1074
In order to comply with radio frequency (RF) exposure limits, see
Warning
Conformity and Regulatory
your local regulatory domain. Statement 339
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Warning
Statement 1001
A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.
Warning
Statement 1022
Warning
Installation of the equipment must comply with local and national electrical codes. Statement
1074
Warning
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement
1023
This unit might have more than one power supply connection. All connections must be removed
Warning
to de-energize the unit. Statement 1028
Only trained and qualified personnel should be allowed to install, replace, or service
Warning
this equipment. Statement 1030
Connect the unit only to DC power source that complies with the safety extra-low voltage (SELV)
Warning
requirements in IEC 60950 based safety standards. Statement 1033
OL-32138-01
Information", to find the safe operating distance as required for
Cisco Aironet 1570 Series Outdoor Access Point Hardware Installation Guide
Safety Warnings
Appendix B, "Declarations of
2-3