DigitaLinx DL-HDE100 빠른 설치 매뉴얼 - 페이지 2
{카테고리_이름} DigitaLinx DL-HDE100에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DigitaLinx DL-HDE100 8 페이지. Extender set transmits hdmi, bidirectional ir, rs232 and
ethernet up to 100 meters away using a single category 6 twisted pair cable.
DigitaLinx DL-HDE100에 대해서도 마찬가지입니다: 설치 매뉴얼 (4 페이지), 소유자 매뉴얼 (16 페이지)
페이지 인쇄
The DigitaLinx DL-HDE100 HDBaseT extender set transmits HDMI, bidirectional IR, RS232 and
Ethernet up to 100 meters away using a single Category 6 twisted pair cable.
Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations.
Flexible power design allows the units to be powered at either the TX or RX end, and only one
power supply is required. The 18 volt power supply is secured with a screw-on connector to
prevent the power from being accidentally disconnected.
The DL-HDE100 is sold only as a set. The individual transmitter and receiver are not compatible
with other HDBaseT devices due to proprietary PoE circuitry.
• DL-HDE100 Transmitter and Receiver Set
• (1) Quick Install Guide
• (2) IR Receivers (Eye)
• (2) IR Transmitters (Emitter)
• (1) IR-AC IR Coupler Cable
• (2) 3 pole Terminal Block (attached to extenders)
• (1) DC18v Power Supply with 4 Power Plug Adapters for US, EU, AU, UK
• (4) Mounting Brackets with screws