ARGENTO ALPHA 사용자 설명서 - 페이지 17

{카테고리_이름} ARGENTO ALPHA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ARGENTO ALPHA 20 페이지. Electric pedal-assisted cycle

9.2 Display backlight

Indicated by the symbol b1, allowed values: 1-5.

Indicated by the symbol 0F, allowed values: 0-15.

The values set correspond to the minutes.

If the set value is 0, this function is not activated.

If the imported value is a value between 1 and 15, the display will automatically turn

off after a few minutes.

Indicated by the HD symbol, allowed values: 6-34.

The values set correspond to the inches of the wheel diameter. For your model,

leave the value at 28 otherwise the values shown on the display when using your

bike will not be correct.

Indicated by the symbol Pd.

Then enter the password "1919" using the + and - buttons, confirm each single

value in the password entered with the M button.

After entering the password correctly, you enter the speed limit parameter indicated

by the SL symbol, allowed values: 10-100.

Indicated by the HL symbol, make sure that the value set is number 1.

If a different value is set, anomalies in the speed detected on the display could

occur.

The maximum speed allowed by law is 25km / h.

Any interventions not authorized by the manufacturer to the control unit

exclude the manufacturer of any damage caused to people and / or things,

also the warranty on the purchased product is invalidated.

The control unit has been programmed not to allow changes to the maximum

speed parameter.

Maintain a speed and behavior appropriate to your abilities, never use the

bike above 25Km / h as it could cause serious damage and injury to yourself

or other people.

Indicated by the PA symbol, press the + and - buttons to switch between the

selectable values UBE - 3 - 5 - 9.

Do not select the UBE value (manufacturer's test value) in order not to find

anomalies on your display and compromise the normal operation of your electric

bike.

Maximum speed allowed