Epson AcuLaser CX11NF 사용자 설명서 - 페이지 14

{카테고리_이름} Epson AcuLaser CX11NF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson AcuLaser CX11NF 17 페이지. Multi-function colour laser printers
Epson AcuLaser CX11NF에 대해서도 마찬가지입니다: 기본 작전 구드 (26 페이지), 사양 (4 페이지), 설정 매뉴얼 (32 페이지), 여기에서 시작하기 매뉴얼 (8 페이지), 사양 (2 페이지), 보충 설명서 (6 페이지), 업데이트 (1 페이지), 제품 지원 게시판 (5 페이지), 사양 (4 페이지)

Epson AcuLaser CX11N/CX11NF

Caution:

Do not touch the belt on the top of the photoconductor or the

blue area; otherwise, print quality may decrease.

Avoid exposing the photoconductor to light any longer than

necessary.

Do not touch any other components inside the CX11N.

9. Hold the photoconductor by its handle and insert it into

the slots marked with blue arrows inside the CX11N. Push

it in until it clicks into place.

Warning:

Be careful not to touch the fuser, which is marked CAUTION

HIGH TEMPERATURE. If you have been using the CX11N

recently, the fuser may be very hot.

10. Flip down the orange lever, then close cover B.

11. Slide out and flip open the output tray extension, if

necessary.

Epson AcuLaser CX11N/CX11NF

12. Slowly push down the scanner to its original position.

Cleaning the CX11N

If the CX11N's outer case is dirty or dusty, turn off the

CX11N and clean it with a soft cloth moistened with mild

detergent.

Caution:

Never use alcohol or paint thinner to clean the CX11N; these

chemicals can damage the components and the case. Be careful not

to get water on the CX11N mechanisms or any electrical

components.

To clean other parts of the CX11N, see these sections:

❏ "Cleaning the Pickup Roller" (below)

❏ "Cleaning the Print Head" on page 15

❏ "Cleaning the Exposure Window and Document Table" on

page 15

❏ "Cleaning the ADF Pickup Rollers (CX11NF Only)" on

page 16

1. Make sure the CX11N is turned off and that the power cord

is not plugged into an outlet.

2. Open the MP tray cover and remove any loaded paper.

8/05