Epson Artisan 800 - All-in-One Printer 네트워크 설치 매뉴얼 - 페이지 3

{카테고리_이름} Epson Artisan 800 - All-in-One Printer에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson Artisan 800 - All-in-One Printer 29 페이지. Artisan 700/800 series
Epson Artisan 800 - All-in-One Printer에 대해서도 마찬가지입니다: 네트워크 설치 매뉴얼 (41 페이지), 사용자 설명서 (34 페이지), 사용자 설명서 (38 페이지), 카트리지 교체 (2 페이지), 사양 (2 페이지), 빠른 시작 매뉴얼 (8 페이지), 제품 지원 게시판 (5 페이지), 설정 정보 (3 페이지), 자주 묻는 질문 (4 페이지)

Connecting to Your Wireless Network

To add the printer to your wireless network, you need to know the name (SSID)

of your wireless network. If it has security enabled, you also need to know the

security mode and WEP key or WPA passphrase. Enter your network and security

information in the space provided below:

Network name (SSID): ____________________________________________

Security mode (select one):

❑

None

❑

WEP-64, ASCII

❑

WEP-64, Hexadecimal

❑

WEP-128, ASCII

❑

WEP-128, Hexadecimal

❑

WPA-PSK (TKIP)

❑

WPA-PSK (AES)

WEP key or WPA passphrase: _______________________________________

Note:

The printer supports the following wireless security modes: WEP-64, WEP-128, and

WPA-PSK.

If your WEP key is 5 or 13 characters, it's ASCII. If it's 10 or 26 characters, it's

hexadecimal.

If your WPA passphrase contains upper- or lowercase letters, be sure to note them

correctly.

If your wireless network uses WPA as the security mode, you will also need to know

whether it's using TKIP or AES as the encryption algorithm.

If you don't know your wireless network name (SSID) or security settings, contact the

person who set up your wireless network.

Connecting to Your Wireless Network