Epson Artisan 800 - All-in-One Printer Ağ Kurulum Kılavuzu - Sayfa 3

Hepsi Bir Arada Yazıcı Epson Artisan 800 - All-in-One Printer için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Epson Artisan 800 - All-in-One Printer 29 sayfaları. Artisan 700/800 series
Ayrıca Epson Artisan 800 - All-in-One Printer için: Ağ Kurulum Kılavuzu (41 sayfalar), Kullanıcı Kılavuzu (34 sayfalar), Kullanıcı Kılavuzu (38 sayfalar), Kartuşların Değiştirilmesi (2 sayfalar), Teknik Özellikler (2 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Ürün Destek Bülteni (5 sayfalar), Kurulum Bilgileri (3 sayfalar), SSS (4 sayfalar)

Connecting to Your Wireless Network

To add the printer to your wireless network, you need to know the name (SSID)

of your wireless network. If it has security enabled, you also need to know the

security mode and WEP key or WPA passphrase. Enter your network and security

information in the space provided below:

Network name (SSID): ____________________________________________

Security mode (select one):

❑

None

❑

WEP-64, ASCII

❑

WEP-64, Hexadecimal

❑

WEP-128, ASCII

❑

WEP-128, Hexadecimal

❑

WPA-PSK (TKIP)

❑

WPA-PSK (AES)

WEP key or WPA passphrase: _______________________________________

Note:

The printer supports the following wireless security modes: WEP-64, WEP-128, and

WPA-PSK.

If your WEP key is 5 or 13 characters, it's ASCII. If it's 10 or 26 characters, it's

hexadecimal.

If your WPA passphrase contains upper- or lowercase letters, be sure to note them

correctly.

If your wireless network uses WPA as the security mode, you will also need to know

whether it's using TKIP or AES as the encryption algorithm.

If you don't know your wireless network name (SSID) or security settings, contact the

person who set up your wireless network.

Connecting to Your Wireless Network