Epson C11CA18201 - WorkForce 600 Color Inkjet 네트워크 설치 매뉴얼 - 페이지 32

{카테고리_이름} Epson C11CA18201 - WorkForce 600 Color Inkjet에 대한 네트워크 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA18201 - WorkForce 600 Color Inkjet 41 페이지. Using the control panel for wireless network installation
Epson C11CA18201 - WorkForce 600 Color Inkjet에 대해서도 마찬가지입니다: 중요한 설정 정보 (2 페이지), 사양 (2 페이지), 제품 지원 게시판 (5 페이지), 기능 설명서 (28 페이지)

Epson C11CA18201 - WorkForce 600 Color Inkjet 네트워크 설치 매뉴얼
11. Click
OK
12. Click
OK
Note:
If the printer's IP address changes, you will need to repeat steps 1 through 12
to reconfigure Epson Scan network settings.
You're ready to scan and print. See your printed documentation and on-screen
Epson Information Center for details.

Troubleshooting

If you have problems setting up or using your product on a network, check these
sections for help:
"Setup Problems" below
"Printing Problems" on page 34
"Scanning Problems" on page 35
This section also explains how to print a Network Status Sheet (see page 36) and
reset network settings (page 37).

Setup Problems

Software installation failed
Reset the printer's network settings (see page 37) and perform a first time
installation of the printer software. (See page 3 for wireless installations or page 15
for wired installations.)
Cannot connect to or find the wireless router or access point
Try connecting to the wireless router or access point with your computer or
another device to confirm that it is working correctly.
Make sure that the printer is within range of your wireless router or access
point.
Avoid placing the printer near a microwave oven, 2.4 GHz cordless phone, or
large metal object such as a filing cabinet.
32
Troubleshooting
.
again to close the EPSON Scan Settings window.