Epson C11CA20201 빠른 매뉴얼 - 페이지 30
{카테고리_이름} Epson C11CA20201에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson C11CA20201 48 페이지. Basic copying, printing and scanning maintaining your all-in-one solving problems
페이지 인쇄
Maintaining Your All-in-One
Follow the instructions in this chapter for checking and cleaning the print head
nozzles and replacing ink cartridges. To align the print head, if necessary, see your
on-screen User's Guide.
Caution:
To keep your NX400 Series looking like new, don't place anything on top of the cover or
use it as a writing surface. If you need to clean the cover, use only a soft, non-abrasive
microfiber-type cloth.
Checking the Print Head Nozzles
If your printouts are faint or have gaps in them, some of the nozzles in the print
head may be clogged or ink may be running low in one or more of the ink
cartridges. Follow the steps below to check the print head nozzles.
1. Load letter-size paper in the sheet feeder (see
page 5).
2. Press
Setup
3. Press l or r to select
.
OK
4. Select
Nozzle Check
5. Press x
6. Check the nozzle check pattern that prints to see if there are gaps in the lines.
7. If there are no gaps, press
If there are gaps or the pattern is faint, press x
(see page 31).
30
Maintaining Your All-in-One
.
Maintenance
and press
.
Start
Nozzles are clean
, then press
.
OK
.
OK
Nozzles need cleaning
to clean the print head
Start