Cisco Linksys WET610N 빠른 설치 매뉴얼 - 페이지 15
{카테고리_이름} Cisco Linksys WET610N에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Linksys WET610N 20 페이지. 802.11ac
Cisco Linksys WET610N에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (12 페이지), 빠른 설치 매뉴얼 (49 페이지), 사용자 설명서 (17 페이지), 구성 (3 페이지)
페이지 인쇄
WET610N
Troubleshooting
If you encounter any problems during the installation process, please try
the solutions for your problem .
The Bridge is not found.
1 . Follow these instructions until
your problem is solved:
•
Make sure the Bridge is
powered on .
Make sure the network
•
cable is securely
connected to the Bridge
and TV .
Disconnect the power adapter from the Bridge . Wait five seconds .
•
Then connect the power adapter to the Bridge .
Reset the Bridge to its factory default settings . Using an object with a
•
small tip, such as a pen, press and hold the Bridge's Reset button for
approximately five seconds . (The Reset button is located between
the Ethernet and Power ports .)
2 . On the TV, select RETURN to try again .
The TV has lost its connection
to the Bridge.
1 . Follow these instructions until
your problem is solved:
Make sure the Bridge is
•
powered on .
Make sure the network cable is securely connected to the Bridge
•
and TV .
Disconnect the power adapter from the Bridge . Wait five seconds .
•
Then connect the power adapter to the Bridge .
Reset the Bridge to its factory default settings . Using an object with a
•
small tip, such as a pen, press and hold the Bridge's Reset button for
approximately five seconds . (The Reset button is located between
the Ethernet and Power ports .)
2 . On the TV, select RETURN to restart the Network Setup process .
Wireless-N Ethernet Bridge with Dual-Band
Troubleshooting
11