Cisco Linksys WET610N Snelle installatiehandleiding - Pagina 15
Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Cisco Linksys WET610N. Cisco Linksys WET610N 20 pagina's. 802.11ac
Ook voor Cisco Linksys WET610N: Snelle installatiehandleiding (12 pagina's), Snelle installatiehandleiding (49 pagina's), Gebruikershandleiding (17 pagina's), configureren (3 pagina's)
Pagina afdrukken
WET610N
Troubleshooting
If you encounter any problems during the installation process, please try
the solutions for your problem .
The Bridge is not found.
1 . Follow these instructions until
your problem is solved:
•
Make sure the Bridge is
powered on .
Make sure the network
•
cable is securely
connected to the Bridge
and TV .
Disconnect the power adapter from the Bridge . Wait five seconds .
•
Then connect the power adapter to the Bridge .
Reset the Bridge to its factory default settings . Using an object with a
•
small tip, such as a pen, press and hold the Bridge's Reset button for
approximately five seconds . (The Reset button is located between
the Ethernet and Power ports .)
2 . On the TV, select RETURN to try again .
The TV has lost its connection
to the Bridge.
1 . Follow these instructions until
your problem is solved:
Make sure the Bridge is
•
powered on .
Make sure the network cable is securely connected to the Bridge
•
and TV .
Disconnect the power adapter from the Bridge . Wait five seconds .
•
Then connect the power adapter to the Bridge .
Reset the Bridge to its factory default settings . Using an object with a
•
small tip, such as a pen, press and hold the Bridge's Reset button for
approximately five seconds . (The Reset button is located between
the Ethernet and Power ports .)
2 . On the TV, select RETURN to restart the Network Setup process .
Wireless-N Ethernet Bridge with Dual-Band
Troubleshooting
11