Cisco Linksys WET610N Snelle installatiehandleiding - Pagina 16

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} Cisco Linksys WET610N. Cisco Linksys WET610N 20 pagina's. 802.11ac
Ook voor Cisco Linksys WET610N: Snelle installatiehandleiding (12 pagina's), Snelle installatiehandleiding (49 pagina's), Gebruikershandleiding (17 pagina's), configureren (3 pagina's)

Troubleshooting

The Bridge cannot be accessed.

Follow these instructions:

1 . Reset the Bridge to its factory

default settings . Using an object

with a small tip, such as a pen,

press and hold the Bridge's Reset

button for approximately five

seconds . (The Reset button is

located between the Ethernet

and Power ports .)

2 . On the TV, select RETURN to restart the Network Setup process .

No wireless networks are

detected by the Bridge.

Follow these instructions until

your problem is solved:

•

Select Back to repeat the

search for wireless networks .

Repeat the search until your

wireless network is detected .

Select Manual Entry to enter the name of your wireless network (also

•

called an SSID) . Then select Continue . Proceed to the instructions in the

Scan (Manual Setup) section, step C, on page 8 .

NOTE: For more information about how to install the Bridge for

use with the Sony BRAVIA TV, refer to the Online Reference Book

for your TV, and then search for the Network Setup section . For

other information about the Bridge, refer to the User Guide on

the CD included with the Bridge .

Wireless-N Ethernet Bridge with Dual-Band

WET610N