Cisco Meraki MR36-HW 하드웨어 설치 매뉴얼 - 페이지 19

{카테고리_이름} Cisco Meraki MR36-HW에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR36-HW 27 페이지.

4.2.2.1 Powering the MR36-HW with the Meraki AC Adapter (sold separately)

1. Plug the power cord into the MR36-HW and the other end into a wall outlet.

2. Plug an Ethernet cable that is connected to an active Ethernet connection into the Eth0 port on

the MR36-HW.

4.2.2.2 Powering the M410-HW with the Meraki 802.3at Power over Ethernet Injector (sold

separately)

1. Plug the power cord into the PoE Injector and the other end into wall power.

2. Plug an Ethernet cable that is connected to an active Ethernet connection into the "IN" port on

the injector.

3. Route Ethernet cable from the "OUT" port on the injector to the Eth0 port in the cable bay of the

MR36-HW.