Cisco Meraki MR36-HW Instrukcja instalacji sprzętu - Strona 19
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Bezprzewodowy punkt dostępowy Cisco Meraki MR36-HW. Cisco Meraki MR36-HW 27 stron.
Drukuj stronę
4.2.2.1 Powering the MR36-HW with the Meraki AC Adapter (sold separately)
1. Plug the power cord into the MR36-HW and the other end into a wall outlet.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the Eth0 port on
the MR36-HW.
4.2.2.2 Powering the M410-HW with the Meraki 802.3at Power over Ethernet Injector (sold
separately)
1. Plug the power cord into the PoE Injector and the other end into wall power.
2. Plug an Ethernet cable that is connected to an active Ethernet connection into the "IN" port on
the injector.
3. Route Ethernet cable from the "OUT" port on the injector to the Eth0 port in the cable bay of the
MR36-HW.
18