Cisco Meraki MR52 설치 매뉴얼 - 페이지 14

{카테고리_이름} Cisco Meraki MR52에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Meraki MR52 17 페이지. Dual-band enterprise class 802.11ac wave 2 cloud-managed access point
Cisco Meraki MR52에 대해서도 마찬가지입니다: 하드웨어 설치 매뉴얼 (25 페이지)

페이지 인쇄

Attach the AP to the Mount Cradle

(This section applies to wall and/or solid ceiling, drop ceiling or electrical junction box mount

where you have already installed the mount cradle.)

The AP attaches to the mount cradle with two tabs on the cradle that insert into the AP, and is secured to the cradle

using one screw.

To attach the AP to the mount cradle properly, line up the top edge of the AP with the top tab of the mount cradle. Since

the cradle is already mounted to the wall, guide the AP towards the top tab and insert the top tab into the AP's slot.

Then adjust the AP to guide the AP's bottom slot into the cradle's bottom tab until it clicks into place. Once in place, the

AP should be secured to the cradle by using one of the included screws in the cradle's bottom tab.