Cisco Meraki MR52 Manual de instalação - Página 14

Procurar online ou descarregar pdf Manual de instalação para Ponto de acesso sem fios Cisco Meraki MR52. Cisco Meraki MR52 17 páginas. Dual-band enterprise class 802.11ac wave 2 cloud-managed access point
Também para Cisco Meraki MR52: Manual de instalação do hardware (25 páginas)

Imprimir página

Attach the AP to the Mount Cradle

(This section applies to wall and/or solid ceiling, drop ceiling or electrical junction box mount

where you have already installed the mount cradle.)

The AP attaches to the mount cradle with two tabs on the cradle that insert into the AP, and is secured to the cradle

using one screw.

To attach the AP to the mount cradle properly, line up the top edge of the AP with the top tab of the mount cradle. Since

the cradle is already mounted to the wall, guide the AP towards the top tab and insert the top tab into the AP's slot.

Then adjust the AP to guide the AP's bottom slot into the cradle's bottom tab until it clicks into place. Once in place, the

AP should be secured to the cradle by using one of the included screws in the cradle's bottom tab.