Cisco NCS 4201 설치 매뉴얼 - 페이지 38

{카테고리_이름} Cisco NCS 4201에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco NCS 4201 42 페이지.

Connecting to the EIA Console Port

To connect a terminal to the EIA Console port on the chassis, follow these steps:

Step 1

Connect the USB end of the USB-to RJ-45 cable to the EIA Console port.

Step 2

Connect the RJ-45 end of the DB-9 adapter cable to the USB-to RJ-45 cable, as shown in figure below.

Figure 27: Connecting a Modem to the Cisco NCS 4201

Table 2:

Label

Step 3

Connect the DB-9 end of the console cable to the DB-9 end of the terminal.

Step 4

To communicate with the chassis, start a terminal emulator application, such as Microsoft Windows HyperTerminal.

This software should be configured with the following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop-bit

• no flow control

Cisco NCS 4201 Hardware Installation Guide

Component

EIA Console port

USB-to-RJ-45 adapter

Label

Component

RJ-45 to DB-9 cable

Desktop or system

Installing the Cisco NCS 4201