Cisco NCS 4201 Manual de instalação - Página 38

Procurar online ou descarregar pdf Manual de instalação para Ponto de acesso sem fios Cisco NCS 4201. Cisco NCS 4201 42 páginas.

Connecting to the EIA Console Port

To connect a terminal to the EIA Console port on the chassis, follow these steps:

Step 1

Connect the USB end of the USB-to RJ-45 cable to the EIA Console port.

Step 2

Connect the RJ-45 end of the DB-9 adapter cable to the USB-to RJ-45 cable, as shown in figure below.

Figure 27: Connecting a Modem to the Cisco NCS 4201

Table 2:

Label

Step 3

Connect the DB-9 end of the console cable to the DB-9 end of the terminal.

Step 4

To communicate with the chassis, start a terminal emulator application, such as Microsoft Windows HyperTerminal.

This software should be configured with the following parameters:

• 9600 baud

• 8 data bits

• no parity

• 1 stop-bit

• no flow control

Cisco NCS 4201 Hardware Installation Guide

Component

EIA Console port

USB-to-RJ-45 adapter

Label

Component

RJ-45 to DB-9 cable

Desktop or system

Installing the Cisco NCS 4201