Cisco Small Business WAP551 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Cisco Small Business WAP551에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business WAP551 13 페이지. Reboot and reset to factory default settings
Cisco Small Business WAP551에 대해서도 마찬가지입니다: 데이터시트 (8 페이지), 검토 (6 페이지), 빠른 시작 Quide (13 페이지), 브로셔 및 사양 (4 페이지), 매뉴얼 (4 페이지)

페이지 인쇄
Cisco Small Business WAP551 빠른 시작 매뉴얼
Mounting the Cisco WAP551 and WAP561
3
Wireless-N Access Points
You can place your access point on a desktop, or mount it on a wall or
ceiling.

Placement Tips

• Ambient Temperature—To prevent the access point from overheating,
do not operate it in an area that exceeds an ambient temperature of
104°F (40°C).
• Air Flow—Both side panels have vents which must be unobstructed to
prevent overheating.
• Mechanical Loading—The device should be level, stable, and secure
to prevent it from sliding or shifting out of position.

Wall and Ceiling Mounting

The Cisco WAP551 and WAP561 can be wall or ceiling-mounted. There is
a mounting kit packed with your device. The kit is designed to install your
device to the wall or the ceiling.
The mounting bracket has some flexibility so that you can reuse existing
holes drilled for a Cisco WAP121 or WAP321 device. The installer can
remove the Cisco WAP121 or WAP321 and mount the Cisco WAP5xx.
The dimensions for the mount kit screws are as follows:
2
1 7.8 to 8.3 mm/
.31 to .33 in
Insecure mounting might damage the device or cause injury.
W
ARNING
Cisco is not responsible for damages incurred by insecure wall
or ceiling mounting.
4
1
3
2 21.8 to 22.3 mm/
.86 to .88 in
Cisco WAP551 and WAP561 Wireless-N Access Points
4
3 5.5 to 6.0 mm/
.22 to .24 in
4 17.5 to 18.2mm/
.69 to .72 in