Cisco Small Business WAP551 빠른 시작 매뉴얼 - 페이지 6
{카테고리_이름} Cisco Small Business WAP551에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Small Business WAP551 13 페이지. Reboot and reset to factory default settings
Cisco Small Business WAP551에 대해서도 마찬가지입니다: 데이터시트 (8 페이지), 검토 (6 페이지), 빠른 시작 Quide (13 페이지), 브로셔 및 사양 (4 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Power
Off
Solid Green
Flashing Green
Solid Red
Off
WLAN
Solid Green
Solid Amber
Solid Blue
Flashing
Off
LAN
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
6
Description
The device has no power.
The device is powered on. Normal operation.
Upgrading firmware or acquiring an IPv4
address.
Booting or firmware upgrade failed.
Wireless is disabled, for both Radio 1 and
Radio 2 wireless networks
Wireless Radio 1 is in use.
Wireless Radio 2 is in use.
(Cisco WAP561 only) Wireless Radios 1 and 2
are operating in concurrent mode.
Transmitting or receiving data.
No Ethernet link.
GE Ethernet link is active.
FE Ethernet link is active.
Transmitting or receiving data.
Cisco WAP551 and WAP561 Wireless-N Access Points