Cisco WAP131 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} Cisco WAP131에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WAP131 13 페이지. Reboot and reset factory default settings
Cisco WAP131에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 매뉴얼 (4 페이지), 매뉴얼 (4 페이지)

페이지 인쇄
Cisco WAP131 빠른 시작 매뉴얼
POWER—The POWER button is used to turn the power on and off. It is not
applicable when using PoE.
12V DC—The 12V DC jack is used to connect the supplied power adapter
to the Cisco WAP131 if you are not using PoE.
Kensington Lock Slot—The Kensington lock slot is used to attach a cable
and lock to the Cisco WAP131.

Default Settings

Parameter
Username
Password
LAN IP Address
Fallback LAN IP
Subnetwork Mask
If you are using a Cisco RV Series router, the default range for the DHCP
assigned address is from 192.168.1.100 to 192.168.1.254. Any device
connecting to the same LAN will be assigned an IP address in this range.

Mounting the Cisco WAP131

3
You can place the Cisco WAP131 horizontally on a surface so that it sits on
its four rubber feet, or place it vertically on a desktop by using the stand on
its left side.
To place the Cisco WAP131 vertically on a desktop, follow these steps:
Locate the left side panel of the Cisco WAP131, and rotate the stand
S
1
TEP
90 degrees clockwise or anticlockwise.
Place the stand upward so that the Cisco WAP131 stands on a flat
S
2
TEP
desktop.
Cisco WAP131 Quick Start Guide
Default Value
cisco
cisco
DHCP address assigned by server
192.168.1.245
255.255.255.0
3