Cisco WAP131 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Cisco WAP131에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WAP131 13 페이지. Reboot and reset factory default settings
Cisco WAP131에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (13 페이지), 매뉴얼 (4 페이지), 매뉴얼 (4 페이지)
페이지 인쇄
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Off
POWER
Solid Green
Solid Blue
Solid Amber
Solid Red
Flashing
(Green/Blue/
Amber)
WLAN
Off
Solid Green
Solid Amber
Solid Blue
Flashing
LAN
Off
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
Cisco WAP131 Quick Start Guide
Description
The Cisco WAP131 has no power.
The Cisco WAP131 is powered on, booting, or in
normal operation with DC power supply.
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.at power supply.
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.af power supply.
The Cisco WAP131 fails to boot with both
firmware images.
The Cisco WAP131 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
Wireless is disabled for both 2.4 GHz and 5 GHz.
Wireless is enabled in concurrent mode. (The
intensity needs to be the same.)
Wireless is enabled with only 5 GHz in use.
Wireless is enabled with only 2.4 GHz in use.
Transmitting or receiving data.
No Ethernet link.
Gigabit Ethernet link is active.
Fast Ethernet link is active.
Transmitting or receiving data.
5