Cisco WAP131 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy Cisco WAP131. Cisco WAP131 13 stron. Reboot and reset factory default settings
Również dla Cisco WAP131: Skrócona instrukcja obsługi (13 strony), Podręcznik (4 strony), Podręcznik (4 strony)
Drukuj stronę
Verifying the Hardware Installation
5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label
Activity
Off
POWER
Solid Green
Solid Blue
Solid Amber
Solid Red
Flashing
(Green/Blue/
Amber)
WLAN
Off
Solid Green
Solid Amber
Solid Blue
Flashing
LAN
Off
Solid Green
Solid Amber
Flashing
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
Cisco WAP131 Quick Start Guide
Description
The Cisco WAP131 has no power.
The Cisco WAP131 is powered on, booting, or in
normal operation with DC power supply.
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.at power supply.
The Cisco WAP131 is powered on, booting, or in
normal operation with PoE 802.af power supply.
The Cisco WAP131 fails to boot with both
firmware images.
The Cisco WAP131 is upgrading the firmware,
or is acquiring an IPv4 or IPv6 address.
Wireless is disabled for both 2.4 GHz and 5 GHz.
Wireless is enabled in concurrent mode. (The
intensity needs to be the same.)
Wireless is enabled with only 5 GHz in use.
Wireless is enabled with only 2.4 GHz in use.
Transmitting or receiving data.
No Ethernet link.
Gigabit Ethernet link is active.
Fast Ethernet link is active.
Transmitting or receiving data.
5