Cisco WAP361 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Cisco WAP361에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco WAP361 17 페이지. Reboot and reset to factory default settings
Cisco WAP361에 대해서도 마찬가지입니다: 매뉴얼 (4 페이지)

페이지 인쇄

If you are using a Cisco RV series router, the default range for the DHCP

assigned address is from 192.168.1.100 to 192.168.1.254. Any device

connecting to the same LAN will be assigned an IP address in this range.

Mounting the Cisco WAP361

• We recommend that you mount the Cisco WAP361 to a wall or junction

box.

Placement Tips

• Ambient Temperature—To prevent the Cisco WAP361 from

overheating, do not operate it in an area that exceeds an ambient

temperature of 104°F (40°C).

• Air Flow—Both side panels have vents that must be unobstructed to

prevent overheating.

• Mechanical Loading—The Cisco WAP361 should be level, stable, and

secure to prevent it from sliding or shifting out of position.

Wall Mounting

Cisco WAP361 access points can be mounted on walls and junction

boxes, in the vertical orientation with the security screw on the top and the

LED which is located above the Cisco logo.

Cisco WAP361 Quick Start Guide