Cisco Wap581 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Cisco Wap581에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Wap581 17 페이지. Reboot and reset to factory default settings
Cisco Wap581에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (14 페이지), 매뉴얼 (10 페이지)

페이지 인쇄
Cisco Wap581 빠른 시작 매뉴얼

Placement Tips

• Ambient Temperature—To prevent the access point from overheating, do not
operate it in an area that exceeds an ambient temperature of 104°F (40°C).
• Mechanical Loading—The device should be level, stable, and secure to
prevent it from sliding or shifting out of position.

Wall and Ceiling Mounting

The Cisco WAP581 can be wall or ceiling-mounted. There is a mounting kit packed
with your device. The kit is designed to install your device to the wall or the ceiling.
The mounting bracket has some flexibility so that you can reuse existing holes
drilled for a Cisco WAP551 or WAP561 device. The installer can remove the Cisco
WAP551 or WAP561 and mount the Cisco WAP581. You will need 4pcs of anchors
and screws to mount the device. The dimensions for the mount kit screws are as
follows
:
2
1 7.8 to 8.3 mm/ 2 21.8 to 22.3 mm/ 3 5.5 to 6.0 mm/ 4 17.5 to 18.2mm/ .31 to .33
in .86 to .88 in
The details to mount the Cisco WAP581 on a hard ceiling or wall is depicted in the
following diagram
Cisco WAP125 Quick Start Guide
1
3
.22 to .24 in
4
.69 to .72 in
4