CABINETS TO GO Findley & Myers CB33 조립 지침 - 페이지 3
{카테고리_이름} CABINETS TO GO Findley & Myers CB33에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. CABINETS TO GO Findley & Myers CB33 5 페이지. Lazy susan cabinets
CABINETS TO GO Findley & Myers CB33에 대해서도 마찬가지입니다: 조립 지침 매뉴얼 (9 페이지)
페이지 인쇄
Instructions:
►
1.
Assembling the Door Set: Place two doors (J1&J2) on a flat surface and align them from the pilot holes.
Attach them together using the invisible hinge sets (f) and the provided screws, and set aside.
2.
Place face frame (A1) face down on a flat soft working surface (Figure 1).
3.
Insert left side panel (B1) into the grooves of face frame (A1) on the magnetic latch
side. Align the plastic half part of the cam lock connectors. Make sure it fits and lock
connectors with screwdriver by turning the screw located on the cam lock connector
to the right 180° (Figure 2) Stand up side panel up right at this time. (Figure 3)
4.
Insert the bottom (E) with turntable through face frame resting it in the groves provided on the side panel. (Note: If the turntables are not assembled
5.
Insert Right Rear Side Panel (D) connect with the face frame (A1). Insert Left Rear Side Panel (C) (Figure 5) Align the cam lock connectors and lock.
6.
Place the back panel (E) connect with rear side panels and align the cam lock connectors. (Figure 6) Align the cam lock connectors and lock.
7.
Insert shelf with turntable (G) into position, align the cam locks under the shelf and lock. (Figure 7)
A1
Figure 2
E
Figure 4
Figure 5
E
C
D
Figure 6
G
Figure 7
Figure 3
Page 3
(Note: If the doors are already
f
assembled, please continue to Step 2)
Qty 2
Sets
to the bottom and shelf, go ahead and attach
them at this time before completing Step 4.)